This listing is for 1 pickup – Mini Humbucker.
Pickup cover dimensions are 2.67″ x 1.1″ x .55″ (67.95mm x 28mm x 14mm).
2.94″ / 74.6 mm between the centers of the 2 mounting holes.
– stamped NICKEL SILVER base plates with short legs
– Nickel plated NICKEL SILVER covers
– vintage reproduction mini humbucker bobbins
– sand cast Alnico V magnet bars
– single conductor shielded wire with tinned braided copper shield
– Elektrisola AWG42 enameled copper wire
– coils are wrapped with vintage black paper tape – “flat-back” tape
Classic mounting screws and springs are included. This is NOT the way original Gibson pickups were mounted.
Gibson® mounted their Les Paul® Deluxe mini-humbucker a bit differently than other pickups.
An aluminum bracket is fastened to the bottom of the pickup cavity and the height screws thread into the bracket.
We do not sell mounting brackets – but we can drill out the mounting ears on the baseplate using a 9/64″ drill bit.
This allows the height adjustment screws to turn freely in the ears when mounted on the bracket.
