HOT ROD Telecaster pickups set – HAND CRAFTED by Q Pickups.
Alnico 5 magnets with a slightly larger diameter of .195″ and a higher output on these will produce biting treble and snarly mid-tones, perfect for gritty riffs and stinging lead runs on any Telecaster.
BRIDGE PICKUP HOT @. 12kOhm with 43AWG pickup wire
- black vulcanized fiberboard flatwork
- flat non-staggered Alnico V magnets
- copper plated STEEL baseplate
- the coil is wrapped with 8-strand WHITE COTTON string
- wax potted in paraffin and bee`s wax
- 6-32 x 5/8″ round head mounting screws
- vintage style pickup tension/height tubing
- polarity is SOUTH UP / CW winding direction
NECK PICKUP DCR @ 9kOhm with 43AWG wire
- raw non-plated nickel-silver cover
- vintage specs BLACK flatwork /vulcanized fiberboard
- sand cast alnico 5 magnets
- wax potted
- black(ground) and yellow(hot) cloth covered hookup wires
- polarity is NORTH UP / CCW winding direction (R.W.R.P for hum canceling)IMPORTANT!
Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page.#3 x 1″ Round Head Wood Screws
Wood mounting screws are screwed to the body/ wood – under the pickguard – and these require a larger hole in the pickup – so we will re-drill the mounting holes in the pickup to fit the wood screws.#4 – 40UNC Phillips Pan Head Pickguard Screws
Pickguard screws are used for mounting the pickup on the pickguard – this way the pickup height can be adjusted without removing the pickguard.
