Telecaster 6,25kOhm Pickup A3 Neck 50`s Hand Wound Tele CHROME Alnico III

Low output Telecaster® neck pickup – A3 at 6,25kOhm. Low output, bright and twangy with woody bass.

•  sand cast Alnico 3 magnets
•  vulcanized fiberboard flatwork
• CHROME PLATED nickel-silver cover
• hand wound with Elektrisola 43AWG pickup wire
• cloth covered push back hookup wires
• NORTH UP / CCW
• wax potted
• screws and springs / tubing included

IMPORTANT!
Tele neck pickups can be mounted with WOOD or PICKGUARD screws. Please let us know if you need the pickguard or wood mounting screws with this pickup. You can send us a message or leave a note on the checkout page.

#3 x 1″ Round Head Wood Screws – this is the way Fender did it back in the day;
Wood mounting screws are screwed to the body/ wood – under the pickguard – and these require a larger hole in the pickup – so we will re-drill the mounting holes in the pickup to fit the wood screws.

#4 – 40UNC Phillips Pan Head Pickguard Screws
Pickguard screws are used for mounting the pickup on the pickguard – this way the pickup height can be adjusted without removing the pickguard.